JVC KW-V640BT - Using the External Navigation Unit

Other External ComponentsOther External Components
Playback information and key operation
TV
E.g. TV screen for KW-V640BT Region 3
1 Hides the operation buttons on the screen while
video is played.
2 Operation keys*
* See the following “Operation keys on source control screen”.
Operation keys on source control screen
• The appearance of the operation keys may differ,
however the similar operation keys have the same
operations.
• See also “Common operation keys on source control
screen” on page 8.
Touching the operation keys performs the following
actions:
2
[CHJ]/[CHK]
Selects the channel.
• While the navigation screen is displayed, the touch
panel operations are available only for navigation.
To exit the navigation screen: Touch [DISP] on the
pop-up short-cut menu.
Using the external navigation unit
(Only for KW-V640BT Region 3 except for
Indonesian models/KW-V640BTM Region 2/
KW-M540BT Southeast Asian models/
KW-M540BTM)
You can connect a navigation unit (commercially
available) to the navigation input terminal so that you
can view the navigation screen. (Page 44)
• The navigation guidance comes out of the front
speakers even when you are listening to an audio
source.
Viewing the navigation screen
• Set <DISP Key> to [NAV] on the <User Interface>
screen beforehand. (Page 37)
• For navigation settings, see “Navigation settings” on
page 39.
1 Display the pop-up short-cut menu.
2 Switch to the navigation screen.
On the pop-up short-cut menu, touch as follows:
22 ENGLISH
ENKW-V2018TCM.indb22ENKW-V2018TCM.indb22 2018/01/1615:052018/01/1615:05