32
ENGLISH
You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the following procedure, select the external input
correctly. (See “Selecting the external component to use” on page 26.)
1
Select the external component.
• If “LINE INPUT” does not appear on the display, see page
26 and select the external input (“PSM LINE IN”).
2
Turn on the connected component and start playing the source.
3
Adjust the volume.
Note on One-Touch Operation:
When you press CD-CH, the power automatically comes on. You do not have to press
ATT
to turn on the power.
789101112
SEL
SCM
DISP
1
3
CD-
CH
ANA
EXTERNAL COMPONENT OPERATIONS
SEL
To turn up the
volume
To turn down
the volume
EN32-32.KW-XC770[J]/1 99.11.24, 3:30 PM32
To Next Page
Loading...
