8
ENGLISH
Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.
EXAMPLE: Storing an FM station of 88.3 MHz into the preset channel number 1 of the FM1
band
2
3
1
FM/AM
SSM
1
Select the FM1 band.
2
Tune into a station of 88.3 MHz.
See page 6 to tune into a station.
3
Press and hold the button (in this example,
number 1 button) until channel number flashes
(in this example “1ch”).
4
Repeat the above procedure to store other stations into other
preset channel numbers.
Notes:
• A previously preset station is erased when a new station is stored in the same preset channel number.
• Preset stations are erased when the power supply to the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the stations again.
ANA
ANA
ANA
\
ANA
“1ch” flashes for a few seconds,
showing that the station has been preset.
EN06-11.KW-XC770[J]/1 99.11.24, 3:25 PM8
To Next Page
Loading...
