29
Operate JVC recorders
Try changing the remote control code
if you cannot operate a recorder.
z Confirm the code for your recorder by checking the manual it came
with.
z Some models of JVC devices cannot be operated with this remote
control.
z JVC DVD recorders and HDD recorders are set to code “C” or “3” by
default.
z If the battery is removed, the remote control code reverts back to
code A or 1.
Code A or 1 (Default) Code C or 3
Press and hold Press and hold
Note
Operate the VCR,
DVD recorder or
HDD recorder
Operate the DVD
Player
Operate the home
theatre system
VCR/DVR
DVD
HC
A
Select a device
z The indicator lights for 3 seconds
each time the remote control is
operated.
B
Turn on the device
C
Operate the device
z Other buttons can be used to operate
the TV at any time.
VCRs
DVD recorders
HDD recorders
Home theatre
system
TV
DVD Players
TV VCR/DVR
HC DVD
The included remote control can be used to operate JVC recorders
and other devices.
LT-42DV8BJ.book Page 29 Friday, July 6, 2007 11:23 AM
To Next Page
Loading...
Need help?
General
