Selecting “ ” returns to normal viewing mode
(For wide aspect ratio signals)
Only the selected frame
has a moving picture.
Main Sub
Main
Sub
Main
Select the number
of screens
Watch in dual-picture mode
E.g. You can watch TV and video at the same time.
Move up or down a page
Not available for HDMI input.
Useful functions
Select a channel in 12-screen mode
All registered channels are displayed as still images.
Switch between the
sound sources
Change the channel
(Main)
(Sub)
Watch in
multi-picture
mode
MULTI-PICTURE
2 set
1 select
1 select a
channel
2 watch
1
2
3
4
3
4
5
7
6
After steps 1 and 2 above
Set a time
for the TV to
turn itself off
SLEEP TIMER
Cancel
Set the time to “0” in step 4
Stop
children from
watching
specific
channels
CHANNEL GUARD
select
“Channel Guard”
select a channel to lock
Release a channel
View a locked channel
Use the numerical buttons to enter the channel number.
When n appears, press “ ” and enter your “ID No.”.
(If you forget your “ID No.”, check it in step 4.)
Remaining time
You can confirm the remaining time at step
4, after repeating this process.
Lock more channels
Repeat steps 5 and 6
2 next
1 select “Features”
2 next
1 select “Sleep Timer”
2 set
1 select a time in minutes
3 set
1 enter an “ID No.”
(a secret number of your choice)
2 to the next column
Not available in PC mode.
Press “ ” again in step 6
Current programme
Still picture
Take
snapshots
of the screen
FREEZE
Cancel
Press “ ” again, or change the channel
Not available when the SUB-PICTURE is displayed,
or when in PC mode.
You cannot save or export the snapshot.
To Next Page
Loading...
