To Next Page

To Previous Page

Connection

When connecting a signal source to the projector, be sure to:

1. Turn all equipment off before making any connections.

2. Use the correct signal cables for each source.

3. Make sure the cables are firmly inserted.

In the connection illustrations shown below, cables are not included with the projector (see "Shipping

contents"). They are commercially available from electronics stores.

Only HDMI 1 connector supports 4K (Ultra HD)/HDR.

Terminal HDCP ver. Used for

HDMI 1 2.2 4K/HDR source

HDMI 2 1.4 Up to FHD (2K) source

2 2

Notebook or desktop computer

A/V device

1. VGA cable

2. HDMI cable

Questions and Answers:

Need help?

Do you have a question about the JVC LX-NZ3 and is the answer not in the manual?

JVC LX-NZ3 Specifications

General

Display Technology	DLP
Brightness	3000 lumens
Light Source	Laser diode
Lens Shift	Vertical: ±60%, Horizontal: ±23%
Weight	6.3 kg
Lamp Life	20, 000 hours
Zoom	1.6x
Contrast Ratio	30, 000:1
Inputs	HDMI x 2, USB, RS-232
HDR Support	HDR10
Resolution	3840 x 2160 (4K UHD)
3D	Yes (Frame Packing, Side-by-Side, Top-and-Bottom)