23
Menu Functions
DISPLAY menu
Reset Current
Picture Mode
Returns all of the adjustments you’ve made for the selected Picture Mode
(including preset modes, User 1, and User 2) to the factory preset values.
Submenu Functions and Descriptions
Submenu Functions and Descriptions
Aspect Ratio
In the following illustrations, the black portions are inactive areas and the
white portions are active areas.
• Auto
Scales a picture proportionally to fit the projector's
native resolution in its horizontal or vertical width.
This makes the most use of the screen and
maintains the aspect ratio of a picture.
• 4:3
Scales the picture so that it is displayed in the
center of the screen with a 4:3 aspect ratio.
• 16:9
Scales a picture so that it is displayed in the center
of the screen with a 16:9 aspect ratio.
• 16:10
Scales a picture so that it is displayed in the
center of the screen with a 16:10 aspect ratio.
Image Position
Displays the Image Position window. You may use the directional arrow keys
on the projector or remote control to adjust the position of the projected picture.
The values shown on the lower position of the window change with every key
press you made.
This function is only available when the PC signal is selected.
Overscan
Adjustment
Conceals the poor picture quality in the four edges.
The greater the value, the more portion of the picture is concealed while the
screen remains filled and geometrically accurate. Setting 0 means the picture
is 100% displayed.
Phase
Adjusts the clock phase to reduce picture distortion.
This function is only available when the PC signal is selected.
H. Size
Adjusts the horizontal width of the picture.
This function is only available when the PC signal is selected.
To Next Page
Loading...
Need help?
General
