25
Basic operations of disc/file playback
■ When a disc is played back
• When a play list is played back, “PL” is displayed
instead of “PG”.
■ When a disc is stopped
• When a play list is played back, “PL” is displayed
instead of “PG”.
• When “RESUME” is displayed in the display
window, refer to page 29.
■When a disc is played back
• You can use the menu screen to control
playback of a PBC compatible disc.
• To cancel the PBC function, follow the
instructions below.
- Specify the track number using the number
buttons when the disc is stopped.
- Specify the track number using
4
or
x
when the disc is stopped, and then press
[DVD
3
] or
3
(playback).
• When the PBC function is canceled, the “PBC”
display disappears and the elapsed playback
time appears.
• To restore the PBC function, press [TOP MENU/
PG] or [MENU/PL], or open the disc tray once.
• Press [RETURN] to return to the upper layer
during PBC playback.
■When a disc is stopped
(When the PBC function is activated)
• When “RESUME” is displayed in the display
window, refer to page 29.
• When a VCD is stopped, “VCD” is displayed as
shown above.
• When an SVCD is stopped, “SVCD” is displayed
as the disc type.
DVD VR
Chapter number Elapsed playback time
[DISPLAY] is pressed.
Chapter numberOriginal program
number
Original program number
[DISPLAY] is pressed.
Disc type
VCD/SVCD
Track number Playback control
Total playback timeTotal number
of tracks
A few seconds
later
Playback control
[DISPLAY] is pressed.
Disc type Playback control
Basic operations of disc/file playback (continued)
NX-F40_NX-F30[B].book Page 25 Wednesday, December 24, 2008 10:04 AM
To Next Page
Loading...
Need help?
General
