JVC NX-F55 - Display Window on the Main Unit for Disc;File Types

Basic operations of disc/file playback
24
4 Press 5 , K , 2 or 3 (cursor) to
select a group and track.
NOTE
• You can also use the number buttons and 4
or
x to select a track.
• You can also select a group by another method.
(1) Slide the remote control mode selector to
[SHIFT], (2) press [GROUP/TITLE], and then (3)
use the number buttons to enter the desired
group number while “_ _” is displayed in the
display window.
5 Press [DVD 3 ], [USB 3 ] or 3
(playback).
NOTE
• If you have skipped step 3, you do not have to
proceed to step 5.
• JPEG files are continuously played back
beginning with the selected file.
• Display time for a file in slide-show playback is
approximately 3 seconds.
• Press [ENTER] to view only the selected file.
■When a disc is played back
■When a disc is stopped
• When “RESUME” is displayed in the display
window, refer to page 29.
Slide-show playback
Display window on the main
unit for disc/file types
DVD VIDEO
Chapter number Elapsed playback time
[DISPLAY] is pressed.
Chapter numberTitle number
Total number of titles
[DISPLAY] is pressed.
Disc type
For the locations of the remote
control buttons, refer to page 22.
NX-F40_NX-F30[B].book Page 24 Wednesday, December 24, 2008 10:04 AM