49
Operating other equipment
You can operate your TV, set-top box (STB) and
video cassette recorder (VCR) using the remote
control of this system.
*
For the number button usage, refer to “Using the
number buttons” on page 12.
■ IMPORTANT
• Slide the remote control mode
selector to the lowest position.
1 Press [TV].
2 Hold down [TV F].
• Hold down [TV F] until you finish step 5.
3 Press [ENTER].
4 Press number buttons to enter the
manufacturer code.
Examples:
For a Hitachi TV: Press [0], then [7].
For a Toshiba TV: Press [2], then [9].
When the manufacturer of your TV has 2 or more
codes, enter the manufacturer codes in turn and
find the one that operates the TV and the remote
control properly.
The initial code setting is “01 (JVC)”.
Number
buttons
*
/
TV RETURN/
100+
Remote control
mode selector
3
(playback)
Operating a TV using the
remote control
Manufacturer
Code
Manufacturer
Code
JVC 01
Nordmende
13, 14, 18,
26, 27, 28
Akai 02, 05 Okano 09
Blaupunkt 03 Orion 15
Daewoo 10, 31, 32 Panasonic 16, 17
Fenner 04, 31, 32 Philips 10
Fisher 05 Saba
13, 14, 18,
26, 27, 28
Grundig 06 Samsung
10, 19, 32,
35, 36, 37,
38
Hitachi 07, 08 Sanyo 05
Inno-Hit 09 SEG 15
Irradio 02, 05 Schneider 02, 05
Loewe 10 Sharp 20, 39, 40
Magnavox 10 Sony
21, 22, 23,
24, 25
Mitsubishi 11, 33
Telefunken
13, 14, 18,
26, 27, 28
Miver 03 Thomson
13, 14, 18,
26, 27, 28,
30
Nokia 12, 34 Toshiba 29
Setting the manufacturer code
Operating other equipment
NX-F40_NX-F30[B].book Page 49 Wednesday, December 24, 2008 10:04 AM
To Next Page
Loading...
Need help?
General
