21
FM Operation
Auto Scan
While listening to an FM station, press and hold the / button to perform auto scan.
Once a station has been found, the scanning will stop automatically.
Manual Tune
To tune FM frequency manually, press the / button repeatedly until your desired
frequency is reached.
Each turn will adjust the frequency by 0.05MHz. If reception is still poor, adjust the position of
the DAB/FM aerial or try moving the radio to another location.
Scan Setting
In the SCAN menu you can choose if you want your radio to tune to Strong Stations Only
or select All Stations, and it will try to tune to all stations, however some may be very weak.
1. In FM mode, press MENU to display the FM menu.
2. Press the / button to select SCAN and then press the /PAIR button to conrm.
3. Press the / button to select between STRONG and WEAK, and then press the /
PAIR button to conrm.
Audio Setting
If you nd that the station you are listening is not clear, you can select to listen to it in
MONO this can often clear up some of the static.
1. In FM mode, press MENU to display the FM menu.
2. Press the / button to select AUDIO and then press the /PAIR button to conrm.
3. Press the / button to select between STEREO and MONO, and then press the /
PAIR button to conrm.
To Next Page
Loading...
Need help?
General
