29
USB Operation
By connecting a USB mass storage device (including USB ash memory, USB ash players
or memory cards) to this unit, you can enjoy the device’s stored music through the unit.
1. Press the
SOURCE button
on the unit or USB
button on the
remote control
to select the USB
source. The word
“USB” will be
showed on the
display. If there is
no USB device connected, the display will show “No USB”.
2. Press the /PAIR button to pause/resume playback.
3. Press the / button to select next/previous album, and play the rst track.
4. Turn –VOLUME+ dial on the unit, or press VOL+/VOL– button on the remote control
to increase or decrease the volume.
• The player supports the USB music le format of MP3 only.
• The unit can support USB devices with up to 32 GB of memory.
• The unit may not be compatible with all USB devices, this is not an indication of a problem with the
unit.
AUX Operation
Before connecting to the mains socket, use a 3.5 mm to 3.5 mm stereo audio cable
(included) to connect to your external audio device through the AUX socket at the top of
the unit.
1. Connect unit to the mains socket with the mains cable. Press on the unit to switch the
unit on.
2. Press the SOURCE button on the unit or AUX button on the remote control to
select AUX mode.
3. You may operate your audio device directly for playback features.
4. Turn –VOLUME+ dial on the unit, or press VOL+/VOL– button on the remote control
to increase or decrease the volume.
To Next Page
Loading...
Need help?
General
