26
Programme Play
You can programme up to 20 tracks to play in any desired order.
1. Make sure the disc is inserted and the unit is in STOP, and in CD mode.
2. Press the PROG button on the remote to enter MEMORY mode.
3. Press the number (0-9) buttons or the / button on the remote control to select
the track you wish to preset.
4. Press PROG to store.
5. Repeat steps 3-4 to program more tracks.
6. Once programming is complete, press the /PAIR button to start programme play.
7. Press once to stop programme play. Press twice to clear programme. The display
will show “PRG CLR”. Repeat the program steps above to re-enter the new program
les.
To Next Page
Loading...
Need help?
General
