JVC RX-308BK User Manual

RX-308BK
RX-309TN
_ Selecting the Audio Source
=
Monitoring
Page 12
1-14 (No.20375)
The receiver can receive input from compact discs, cassette tapes, turntables, or any audio
source that you connect. You can select a source for either listening or recording.
Listening
Press one of the SOURCE buttons on the receiver or the remote control.
CD Listen to the CD player.
PHONO Listen to a record.
TAPE 1 Listen to the.tape deck connected to the TAPE 1 jacks.
VIDEO SOUND/ av
TAPE 2 Listen to the tape deck connected to the TAPE 2 jacks.
FM Listen to an FM broadcast.
AM Listen to an AM broadcast.
IMPORTANT! The TAPE 2 button has a different function from other source selector
buttons, because it allows you fo monitor the quality of the recording. For more
details, see Monitoring below.
Revocsing =
The source ‘heli pay is automatically selected as the source to be recorded. While
recording, you can listen to the selected source at any desired volume and tone settings.
NOTE: Volume and Tone adjustments do not affect recording.
IMPORTANT!
When
recording
from
TAPE
2
to
TAPE
1,
press
the
VIDEO
SOUND/
TAPE
2
button
and
another
button
other
than
TAPE
1.
Using the Monitor feature, you can compare the sound quality of the source to the sound quality
of the recording being made.
Tor
uset
the
Monitor
feature
hie
recording
onto
a
cassette
deck
connected
to
the
TAPE
2
jacks,
isn’ 1 Press the TAPE 2 button.
The “TAPE 2 MONITOR’ light appears and you can listen to the sound of the cassette
deck connected to the TAPE2 jacks. You are now hearing the quality of the recording,
not the quality of the source.
Step 2 Press the TAPE 2 button again.
This turns off the “TAPE 2 MONITOR” light, and the speakers play the previously
selected source.
NOTE: If the cassette deck has three heads, you can hear the sound of the recording at
the same time as it records on the tape.

JVC RX-308BK Specifications

General

Brand	JVC
Model	RX-308BK
Category	Stereo Receiver
Language	English