JVC RX-308BK User Manual

RX-308BK
RX-309T-N
Receiving an AM/FM Broadcast
To receive an AM/FM broadcast, select either AM or FM using the AM/FM button. Then tune
to the precise frequency using the TUNING buttons.
Tuning
=
qyune
=
Tune
to
the
frequency
of
a
desired
station
using
the
TUNING
buttons.
Pressing
the
right
button
increases the frequency, and pressing the left button decreases the frequency. Tapping the
:
TUNING
button
once
changes
the
frequency
in
steps
of
10
kHz
for
AM
and
0,1
MHz
for
FM.
There are two tuning modes: Manual and Automatic.
Manual
Tuning
If
you
know
the
frequency
of
a
desired
station,
hold
down
the
TUNING
button
to
start
the
frequency changing quickly. Release the TUNING button near the desired station and tap it
repeatedly until you arrive at the correct frequency.
Automatic
Tuning
If
you
want
to
scan
frequencies
for
a
desired
station,
hold
down
the
TUNING
button
to
start
the
:
frequency
changing
quickly.
When
you
release
the
TUNING
button,
the
frequency
continues
to
change
until
it
reaches
a station.
When
a
station is
correctly
tuned,
the
“TUNED”
light
appears
on
the
display
window.
Once a tuned frequency is preset, it can be directly recalled using the TUNES buttons. For
details, see page 14.
NOTE: When you use automatic tuning, weak stations are ignored. To pik up weak
Stations, use manual tuning. 2 :
IMPORTANT! If the receiver is tuned to a station but the “TUNED” light does not
appear, try aie the antenna for better reception.
Selecting an FM Reception Mode .
FM
MODE
MUTE
Pressing
the
FM
MODE-MUTE
switch
switches
between
these
modes.
eee)
The “MUTE-AUTO” light appears on the display window. You hear either stereo sound or
monaural sound, depending on the broadcast. If it is a stereo broadcast, the “STEREO” light
appears. This mode is also useful for suppressing static “noise” between stations.
The “MUTE-AUTO” light disappears. You hear monaural sound even if a broadcast is in
stereo. This mode is also useful when a stereo broadcast is noisy because of a weak signal,
NOTE: Using the Automatic Tuning mode, the sound of a broadcast with a weak signal
may be muted. In this case, select the monaural mode.
Page 13
(No.20375) 1-15

JVC RX-308BK Specifications

General

Brand	JVC
Model	RX-308BK
Category	Stereo Receiver
Language	English