JVC RX-308BK User Manual

AM Tuner
General
Capture Ratio
Alternate Channel Selectivity
Frequency Responce
Tuning Range .
Usable Sensitivity
Loop antenna
Extemal antenna
Signal-to-Noise Ratio
Selectivity
Power Requirements
Power Consumption
Dimensions (W x H x D)
Weight
RX-308BK:
RX-309TN
1.5 dB (10 mV / 300 ohms)
60 dB: (£400 kHz)
30 Hz to 15 kHz: (+0.5 dB, -3 dB)
530 kHz to 1,710 kHz
300 WV/m at 1,000 kHz
30uV at 1,000 kHz
50 dB (100mV / m, at 1,000 kHz)
25 dB (+10 kHz)
AC 120V’V, 60 Hz
220 watts, 310 VA
17-3/16 x 5 x 13-7/16 inches
435 x 126 x 341 mm
*Measured by JVC Audio Analysis System.
Designs and specifications subject to change without notice.
For Universal
AMPLIFIER SECTION
Output power
Total harmonic distortion
(1kHz,,8 ohms)
Intermodulation pistoption
For
Europe,
UK,
Australia
AMPLIFIER SECTION |
Output power
: Total Haenente distortion
_(kHz,.8.ohms) ;
Intermodulation distortion ,
T0watts per channel, min. RMS,both channels
driven into 8 ohms. at 1kHz with no more than
0.9% total Mae ioriic distortion (ITEC268-—3/DIN)
2x 70W, 8 ohms.40Hz to 20kHz with 0. 08%
total harmonic distortion may’
0.08%* at 70watt output
0.08% at 70watt output, 8 ohms
70watts per = Ghatmiolreinc RMS: both charinels
driven
into
4
ohms
at
1kllz
with
no
more
than
0.9%
total
harmonic
distortion
(IEC268-3/DIN).
SOwatts per channel. min.RMS, both channels
driven into 8’ohms at IkHz with no more than
0.9%
total
harmonic
distortion
(TRC2Gs
=)
TEAR
2x45W, 8 ohne ,40Hz to 20kHz with 0. 08%
total harmonic distortion
0.08% at 45watt output
0.08% at 45watt output, 8 ohms.
17.7 lbs (8.0 kg)
Page 23.
(No.20375)
1-25

JVC RX-308BK Specifications

General

Brand	JVC
Model	RX-308BK
Category	Stereo Receiver
Language	English