JVC RX-772VBK - Creating Your Own SEA Mode

Page 23
Creating Your Own SEA Mode
You can adjust and store your own SEA adjustment into memory (USERMODE).
On the front panel only:
If you do not want to store your adjustment, but rather want to adjust the SEA temporarily, skip step 3 below.
1. Press SEA ADJUST so that the Control
%%
%%
% /
fifi
fifi
fi /
@@
@@
@ /
##
##
# buttons work for the SEA adjustment.
The lamp next to the button lights up.
2. Adjust the SEA frequency and its level.
• Press Control @ / # to select the frequency range to adjust.
• Press Control % / fi to adjust the level.
3. Press MEMORY (next to the SEA ADJUST button).
Your adjustment is stored into USERMODE.
To recall your own SEA adjustment
See page 22.
To erase a stored adjustment
Storing a new adjustment into USERMODE erases the previously stored one.
MEMORY
SEA
ADJUST
100 1k 10k
Front panel
MEMORY
SEA
ADJUST
MENU
See also
page 33.
RX-772VBK[J]_0052-001A.En.01-23 97.4.8, 3:24 PM23