JVC RX-778VBK Instructions

For Dolby Pro Logic:
"TEST TONE": Output a test tone.
"CENTER LEVEE": Adiust the center speaker output
level. **
"REAR L LEVEE": Adiust the left rear speaker output
level. *
"REAR R LEVEL": Adiust the right rear speaker output
level. * 2.
For Dolby Digital Surround:
"TEST TONE": Output a test tone.
"CENTER LEVEL": Adiust the center speaker output
level. ** 3.
"REAR L LEVEL": Adiust the left rear speaker output
level. *
"REAR R LEVEL": Adiust the right rear speaker output
level. *
For JVC Theater Surround: 4.
"TEST TONE": Output a test tone.
"CENTER LEVEL": Adiust the center speaker output
level. **
"REAR L LEVEL": Adiust the left rear speaker output 5.
level. *
"REAR R LEVEL": Adiust the right rear speaker output
level. *
"DSP EFFECT": Select the effect level.
Notes:
* Not displayed when "REAR SPK"is set to "NONE" (see page
14).
** Not displayed when "CENTER SPK" is set to "NONE" (see
page 14).
7, When you finish, press EXIT repeatedly until the
menu disappears [Yom the TV.
• Creating Your Own SEA Mode
(Also see page 19)
1. Press MENU.
The MAIN MENU appears on the TV_
• Pressing one of the A / V / <1/ _> buttons also displays the
MAIN MENU.
.
• Selecting Your Favorite SEA Mode
(Also see page 19)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the A / V / <I / t> buttons also displays the
MAIN MENU.
2, Press A / V to move _ to "SOUND
CONTROL," then press <_ / E>.
The SOUND CONTROL menu appears.
3, Press A / V to move G=
to "SEA," then press <_
/_.
The SEA menu appears.
4. Press A / V to move
€3[_: OP£RAT E
to "SEA MODE."
.
Press A / V to move c5= to "SOUND
CONTROL," then press <a / E>.
TheSOUND CONTROL metal appears.
Press A ] V to move G= to "SEA," then press
<a/ _>.
The SEA menu appears.
Press A / V to move
to "SEA ADJUST."
The SEA ADJUST menu
appears.
Press AIVI<:IIE> to
adjust the SEA mode as
you want.
/ _ : Select the frequency ranges,
A / V : Adjust the frequency levels,
SEA USERMODE
[3 0
_:M£MORY
Press SET to store the setting into the SEA
USERMODE.
• If you press EXIT, without pressing SET in this step, you can
return to the SEA menu. (The adiustment you have made is
active but not stored.)
When you finish, press EXIT repeatedly until the
menu disappears from the TV,
5, Press <a / _ to select the SEA mode you want.
6, When you finish, press EXIT repeatedly until the
menu disappears fYom the TV.
30

JVC RX-778VBK Specifications

General

Brand	JVC
Model	RX-778VBK
Category	Receiver
Language	English