JVC TM-H150CG/E

1-20 (No.YA068)
[ WHITE BALANCE ADJUSTMENT : METHOD 1 ]
• Accordance with the screen display, select the each WHITE BALANCE mode following below.
• Refer to the "Low-Light adjustment" corresponding page about detailed adjustment steps.
CUTOFF ADJUSTMENT MODE (LOW LIGHT ADJUSTMENT)
DRIVE ADJUSTMENT MODE (HIGH LIGHT)
• Refer to the "High-Light adjustment" corresponding page about detailed adjustment steps.
[WHITE BALANCE ADJUSTMENT : METHOD 2]
R CUTOFF :
< FUNCTION DISPLAY >
< FRONT PANEL BUTTON >
Contents
Setting value
RGB
EXIT
SERV
Contents button
Display 1H line button
Setting value (+/-) button
Exit button
CUTOFF ADJUSTMENT MODE
RGB
EXIT
SERV
R CUTOFF :
Fig.11
R
G
B
6500 R DRIVE :
< FUNCTION DISPLAY >
< FRONT PANEL BUTTON >
Contents button
Display 1H line button
Setting value (+/-) button
Exit button
RGB
EXIT
SERV
DRIVE ADJUSTMENT MODE
RGB
EXIT
SERV
6500 R DRIVE :
Fig.12
ContentsColor temp.
Setting value
6500
9300
R
B
< FUNCTION DISPLAY >
<FRONT PANEL BUTTON>
<W01> :
W01~W07 ITEM ADJUSTMENT MODE
DISP
EXIT
<W01 > :
Fig.13
Item No.
Setting value
EXIT DISP
Item No.
select button
Exit button
Display on/off button
Setting value
(+/-) button
r----------------
lOCB±) o *** :
L----------------
0 CHROMA CONTRASTO VOWME/SELECT
u:J: C!l G ""CD
..,. PHASE BAIGHT il
MENU
D ·
r----------------
(X..l=l±) o *** :
L----------------
0CHROMA CONTRASTO VOWME/SELECT MENU
u:J: C!l G""CD
BRIGHTil
D·
~---------------,
: ~~E)!±) DD ... I
---------------~