JVC UX-H10 Service Manual

(No.MB066)1-9
3.1.4 Removing the CD mechanism board
(See Fig.11 ~ 13)
• Prior to performing the following procedure, remove the front
panel assembly, the main board and the CD mechanism
assembly.
(1) Disconnect connector on the CD mechanism.
(2) Remove the four screws H on the CD mechanism
assembly.
(3) Cut off the band setting each wire and disconnect the card
wire from connector on the CD mechanism.
(4) Remove the screw J attaching the wire on the CD
mechanism board.
Caution:
The metal washer and nut come off.
(5) Remove the four screws K attaching the CD mechanism.
Fig.11
Fig.12
Fig.13
HH
Switch board
CD mechanism
board
CD mechanism
assembly
Front panel
Connecter
Band
J
Band
Connecter
CD mechanism
assembly
Nut
CD mechanism
board
KK
CD mechanism
assembly
CD mechanism

JVC UX-H10 Specifications

General

Brand	JVC
Model	UX-H10
Category	Stereo System
Language	English