19
4 Select the playback source.
(1) Proceed to the playback source setting.
(2) Select the playback source: “DISC,” “USB,” or
“TUNER.”
When you select “TUNER”
–1 Press
4/x to select “AM PRE” or “FM PRE,”
then press TIMER.
–2 Press
4/x to select preset number, then press
TIMER.
5 Activate the Daily Timer
.
The (Timer) indicator on the display and the TIMER
lamp on the amplifier unit light.
6 Turn off the System.
To deactivate the Daily Timer
When the System is turned on...
The (Timer) indicator on the display and the TIMER
lamp on the amplifier unit go off.
• When both the Daily Timer and the Sleep Timer are
activated, the System is turned off at the earlier off-time.
How the Daily Timer works
Once the Daily Timer is set, the (Timer) indicator
lights on the display and the TIMER lamp on the
amplifier unit lights red. The Daily Timer is activated at
the same time everyday until the timer is turned off
manually.
When the on-time comes
The System turns on, tunes in to the specified station or
starts playing the specified source.
• The sound level is gradually turned up to the last level
you set. (Maximum Vol.16)
• While the Daily Timer is working, the (Timer)
indicator flashes on the display.
• Without canceling the Daily Timer, you can change the
source or adjust the volume after the Daily Timer starts
playback.
When the off-time comes
The System stops playback and turns off (standby).
• The Daily Timer setting remains in memory until you
change it.
UX-TB3[B].BOOK Page 19 Friday, November 7, 2008 2:32 PM
To Next Page
Loading...
Need help?
General
