23
Specifications
Amplifier unit (AX-UXTB3)
Output Power: 20 W per channel, min. RMS,
driven into 6 Ω at 1 kHz with no
more than 10% total harmonic
distortion. (IEC268-3)
Speakers/Impedance: 6 Ω – 8 Ω
Player/tuner unit (XT-UXTB3)
Tuner section
FM tuning range: 87.50 MHz – 108.00 MHz
AM (MW) tuning range: 522 kHz – 1 629 kHz
CD player section
Measurement Condition: 2W, IEC-A weighted
Dynamic range: 75 dB
Signal-to-noise ratio: 75 dB
Wow and flutter: Immeasurable
Terminals
AUDIO IN:
Input sensitivity/Impedance:
250 mV/50 kΩ
USB MEMORY:
USB specification Compatible with USB 2.0 Full-
Speed
Compatible device: Mass storage class
Compatible system: FAT16, FAT32
Output power: DC 5 V 500 mA
General
Power requirement: AC 230 V , 50 Hz
Power consumption: 50 W (at operation)
10 W (on standby/display on)
0.9 W (on standby/ECO mode)
Dimensions (approx.):
Player/tuner unit: 231 mm × 79 mm × 230.5 mm
(W × H × D)
Amplifier unit: 231 mm × 79 mm × 245 mm
(W × H × D)
Mass (approx.):
Player/tuner unit: 1.14 kg
Amplifier unit: 2.92 kg
Speakers (SP-UXTB3)
Type: 2-way Bass reflex
Speaker units:
Tweeter: 4 cm cone × 1
Woofer: 10 cm cone × 1
Impedance: 6 Ω
Dimensions (approx.): 170 mm × 250 mm × 160 mm
(W × H × D)
Mass (approx.): 1.5 kg each
Supplied Accessories
See page 3.
Design and specifications are subject to change without notice.
UX-TB3[B].BOOK Page 23 Friday, November 7, 2008 2:32 PM
To Next Page
Loading...
