8
Listening to the Radio
To select the band (FM or AM)
To tune in to a station
While FM or AM is selected...
Station searching starts and the frequency indication starts
changing on the display.
When a station (frequency) with sufficient signal strength is
tuned in, the searching will stop.
To stop searching manually,
press either button.
• When you press the button repeatedly, the frequency
changes step by step.
If the received FM station is hard to listen
Reception will improve though stereo effect is lost.
To restore the stereo effect,
press the button repeatedly to
select FM.
To preset the stations
You can preset 20 FM and 10 AM stations.
1 Tune in to a station you want to preset.
2 Activate the preset number entry mode.
• Finish the following process while the indication on the
display is flashing.
3 Select a preset number for the station.
4 Store the station.
The PROGRAM indicator lights up on the display.
To tune in to a preset station
1 Select a band (FM or AM).
2 Select a number of the preset station.
FM FM MONO
AM
1 sec.
FM FM MONO
AM
To select a number, see “How to
select numbers” on page 7.
• You can also use
4 or x.
To select a number, see “How to
select numbers” on page 7.
• You can also use
4 or x.
The PROGRAM indicator lights
up on the display.
Remote
ONLY
FM FM MONO
AM
UX-TB3[B].BOOK Page 8 Friday, November 7, 2008 2:32 PM
To Next Page
Loading...
Need help?
General
