JVL MAC050 - Page 179

JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500 175
5.4 Expansion module MAC00-B42
5.4.5 Expansion MAC00-B42 hardware description
The MAC00-B42 offers IP65 protection and M12 connectors which make it ideal for au-
tomation applications where no additional protection is desired. The M12 connectors of-
fer solid mechanical protection and are easy to operate.
The connector layout:
Note 1: See also Dip switch for RS485 active termination, page 176
(Continued next page)
“PWR” - Power input. M12 - 5-pin male connector
Signal name Description Pin no.
JVL Cable
WI1000M12
F5T05N
Isolation
group
P+ Main supply +18-32VDC. Connect with pin 2 * 1 Brown 1
P+ Main supply +18-32VDC. Connect with pin 1 * 2 White 1
P- Main supply ground. Connect with pin 5 * 3 Blue 1
Unused Future option 4 Black -
P- Main supply ground. Connect with pin 3 * 5 Grey 1
* Note: P+ and P- is each available at 2 terminals. Make sure that both terminals are connected in order to
split the supply current between 2 terminals and thereby avoid an overload of the connector.
“COM” - Interface RS232 and RS485. M12 - 5-pin female connector
Signal name Description Pin no.
JVL Cable
WI1000M12
M5T05N
Isolation
group
RS232 Rx
RS232 interface receive terminal.
Leave open if unused
1 Brown 1
RS232 Tx
RS232 interface transmit terminal.
Leave open if unused. - Important, see note1:
2 White 1
RS485 B+
RS485 interface terminal.
Leave open if unused
3 Blue 1
RS485 A-
RS485 interface terminal.
Leave open if unused
4 Black 1
GND Interface ground (same as main ground). 5 Grey 1
Only MAC400 to 4500
IO1
Basic I/O’s
M12 - 8pin male
connector including:
and
and
IN1-4 O1-2
O+ IO-
Expansion module MAC00-B42 front plate
PWR
Power
M12 - 5pin male
connector including:
and
P+ P-
COM
Interface RS232 and RS485
M12 - 5pin female
connector including:
and
and
RS232 RX TX
RS485 A B
GND
IO2
Extended I/O’s
M12 - 8pin female
connector including:
and
and
IN5-8 O3-4
AIN GND
TT1280-10GB
Hardware serial number