332 JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500
5.11 Expansion Module MAC00-R1/R3/R4
5.11.24 Wait for an input combination before continuing (single input)
Examples shown at next page.
Icon:
Dialogue:
Function:
Waits for a specified input condition to occur. The next line in the program will not be exe-
cuted until the input condition has been met. If “Input type” is set to “Single”, the command
will wait for one of four things to happen on the specified input: that the input tests as high,
that the input tests as low, that the input transitions from high to low (Falling Edge). The
input is tested with 30 microsecond intervals.
To Next Page
Loading...