JVL MAC050 - Page 337

JVL A/S - User Manual - Integrated Servo Motors MAC050 - 4500 333
5.11 Expansion Module MAC00-R1/R3/R4
Example 1- Wait for level at an input
The program example below shows how a wait command is stalling the program execu-
tion until input 3 is active (applied with a voltage from outside).
If input 3 is NOT set active the program execution stay in line 1.
Example 2- Wait for a shift at an input
The program example below shows how a wait command is stalling the program execu-
tion until input 1 is applied a rising edge (shift from 0 to 1).
If input 1 is NOT applied a rising edge the program execution keeps waiting in line 1.
Input 1
Program line
Rising edge
The programexecution stay in line 1 until a rising edge have been applied
1
0
1
23456789