VI User Manual | Impulse Ergo Pedelec 9
From the rst moment on, you have ll assistance.
This is unfamiliar but comfortable. Practice starting
up in a safe location before venturing into the road
trac.
1.1 Riding in the ERGO power-assist
mode
1. Follow steps 1 to 9 in ➠ Chapter 1 “Quick start”.
2. Put on the chest belt supplied. Ensure that it does not
slip and that the electrodes are always in contact with
the skin.
Moisten the reverse of the chest belt with electrode
gel or water before putting it on.
3. Navigate to the ERGO power-assist mode using the ar-
row buttons. The notication “Determine heart rate …”
appears on the display.
Chest belt
As soon as the heart rate is displayed, you can adjust
the settings rther.
If the display does not detect the chest belt, the
prompt “Please put on chest belt” appears.
In this case, please refer to ➠
Chapter 1.2 “Trouble-
shooting for the ERGO power-assist mode” to nd out
how to recti this problem.
4. Now press the Set button for a minimum of four sec-
onds. You are taken to the menu sub-items.
5. Navigate to the menu sub-item “ERGO settings” using
the arrow buttons. Press the Set button.
To Next Page
Loading...
