SMTP user name: username@gmail.com
SMTP port: 465
SSL: enabled
Yahoo mail server:
SMTP server: smtp.mail.yahoo.com
SMTP user name: username@yahoo.com or username@yahoo.com.cn
SMTP port: 465
SSL: enabled
163 mail server:
SMTP server: smtp.163.com
SMTP user name: username
SMTP port: 25
SSL: disabled
5.2.3.8 FTP setting
See Figure 27 for the interface of “FTP setting”:
Figure 27
It sends the record files and snapped images generated after alarm is triggered in FTP mode to specified
FTP server, supports two FTP servers, when the preferred one goes wrong, system will switch to the
alternate one.
[FTP URL]: The IP address or HTTP address of FTP server.
[Server port]: Port of FTP server, the default port is 21.
[FTP catalog]: Path on remote FTP server, if the path doesn’t exist or has not been filled in, the device will
create a file folder under the root directory of FTP server.
[User name] and [Password]: User name and password of FTP server.
Note：If you want to upload the record files and snapped images, you must have the writing authority to
write on the FTP server.
5.2.3.9 DDNS setting
See Figure 28 for the interface of “DDNS setting”:
To Next Page
Loading...