IP Camera doesn’t support the storage that can be formatted into several partitions, so if you want to
format it on PC before using it, please format it into one partition.
5.2.4.2 Record Setting
See Figure 34 for the interface of “Record Setting”:
Figure 34
[Record Schedule]: Set the period of scheduled recording, two periods allowed.
[File save mode]: Set the save scheduled recorded files to FTP server via FTP uploading, FTP server can
be set up in [FTP settings].
Notice：Record files are saved via FTP uploading. SD card is needed for cache memory support,
otherwise record files will be overwritten by new files due to insufficient cache memory space.
5.2.4.3 Snap Setting
See Figure 35 for the interface of “Snap Setting”:
To Next Page
Loading...