29
NAVSta
c
[
ccc
...] | ALL | NONE (
c
= A – Z)
Default ALL
The NAVSTA command specifies which originating stations will be copied in the NAVTEX mode.
Each transmitting station uses a unique identifier, allowing you to select only those stations of in-
terest in your area. If you specify ALL, the KAM Plus will copy all NAVTEX stations. Specifying
NONE will disable copying of any NAVTEX station, thus effectively disabling the NAVTEX mode, and
will cause a soft reset.
See also: navmsg, navtex
Navtex
Immediate command
This command will place your KAM Plus in the NAVTEX mode. This allows you to copy AMTEX mes-
sages (refer to the NAVTEX section of this manual and the 8th Computer Networking Conference
papers for details).
See also: misschar, navclr, naverr, navlog, navmsg, navsta, pmode
NDHCIear Not in v8.2
Immediate command
This command clears the list of nodes heard by the KAM Plus.
See also: ndheard
NDheard [S | L]
Immediate command
This command displays a list of nodes whose ID packets have been heard by the KAM Plus. The
list includes KA-Nodes, Net/Rom nodes, TheNet nodes and G8BPQ nodes. An asterisk, *, indicates
that the station was heard through a digipeater. The date/time stamp is also displayed indicating
the last time this station was heard. If the S option is used (ND S), only the callsigns of the sta-
tions heard will be displayed. If the L option is selected, all callsigns contained in the received
packet are displayed.
See also: mynode, ndhclear
NDWild ON | OFF
Default OFF
When OFF, the KA-Node will only recognize connect requests directed to the MYNODE call. When
ON, connect requests to any SSID of the MYNODE call will be recognized as connects to the KA-
Node, if that SSID is not being used for any other ID in the KAM Plus.
See also: my alias, mycall, mygate, mynode, mypbbs, myremote
NEwmode ON | OFF
Default ON
When ON, the KAM Plus will return to Command Mode if the station on the current I/O stream dis-
connects. The KAM Plus will not return to Command mode if the station disconnecting is on a dif-
ferent stream. When OFF, a disconnect will not cause the KAM Plus to change modes.
See also: connect, disconnect, status
To Next Page
Loading...
