Kapsys SmartVision - Page 80

SmartVision & SmartVision LITE – User Guide (Rev. 2.7) – Version 1943.4105 80
"Pedestrian navigation" settings:
- "Automatic instruction repeat": defines the time interval for repeating
navigation announcements (None, 1, 3, 5 or 10 minutes).
- "Hour indication" enables or disables the hour indication in the instructions
related to manoeuvers.
"Car navigation" settings:
- "Routing parameter": specifies the criteria used for route calculation (Fastest,
Shortest).
- "Enable highways": specifies route calculation with or without highways.
- "Allow toll roads": specifies route calculation with or without toll roads.
- "Automatic instruction repeat": specifies time interval for navigational
messages playback (None, 1, 3, 5 or 10 minutes).
"Free navigation" settings:
- "P.O.I announcements": selects and screens the P.O.I category to be
announced when you get close.
- "K-Tag announcements": selects and screens the various K-Tag categories
to be announced when you get close.
- "Type of announcement": defines the POI or K-Tag announcement mode
when one is nearby (No notification, Sound alert or voice announcement).
- "Cardinal direction information": enables or disables the cardinal direction
announcements of the current road.
- "Automatic instruction repeat": specifies the time interval for pedestrian
navigation message playback (None, 1, 3, 5 or 10 minutes).
"Direct guidance" settings:
- "Automatic instruction repeat": specifies the time interval between direct
guidance instructions (None, 1, 3, 5 or 10 minutes).
- "Direct guidance when destination is reached": enables or disables
automatic switch to Direct Guidance at the end of a pedestrian or car
navigation session.