SmartVision & SmartVision LITE – User Guide (Rev. 2.7) – Version 1943.4105 66
SOS Function
For your security, SmartVision offers an SOS
function which can be used to
make location-based emergency calls or send urgent messages to pre-defined
contacts (10 au maximum).
Warning: KAPSYS shall not be held liable for any damage, either direct or indirect, in
the event the SOS feature fails to operate due to a technical problem with the unit or
the telephone network being unavailable.
Activating the SOS function
This application is used to set "automatic" sending of an alert such as a phone call or
a message or both, to one or several contacts chosen by you.
The SOS is enabled by activating the orange pushbutton located on the back of the
phone.
Push and slide the button downwards as shown.
Please note: the SOS function is disabled by default. It must be activated before use.
If it is not properly activated, you will be notified by an alert in the status bar.
Please note: A warning window appears when the SOS button is activated and as
the process of SOS is underway.
To Next Page
Loading...
