EasyManua.ls Logo

Kapsys SmartVision - APPENDIX 2 - Keypad control; Keypad control mode

Kapsys SmartVision
107 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SmartVision & SmartVision LITE User Guide (Rev. 2.7) Version 1943.4105 98
APPENDIX 2 Keypad control
Keypad control mode:
SmartVision allows quick access to some functions by pressing and holding the hash
key "Hash Mark" located at the bottom right of the physical keypad, and
pressing on another key of the physical keypad. A beep will signal the switch to
"keypad control mode". If no other key is pressed right after (10 seconds), another
beep will go off.
If you press the "Hash Mark" control key with another key, the device will
perform the following commands:
- Press and hold the "Hash Mark" key and press "1": inform you about
your smartphone’s status (time, battery level, current network status, Wi-Fi
status, GPS status, Bluetooth status, NFC Status, ringer mode and alarm
status).
- Press and hold the "Hash Mark" key and press "2": lets you read the
content of the current screen.
- Press and hold the "Hash Mark" key then press "3": displays the
smartphone status bar.
- Press and hold the "Hash Mark" key then press "4": increases the speed
of speech.
- Press and hold the "Hash Mark" key then press "5": decreases the
speed of speech.
- Press and hold the "Hash Mark" key then press "7": repeat the last text.
- Press and hold the "Hash Mark" key then press "8": spell the last text.
- Press and hold the "Hash Mark" key then press "9": direct access to
“Accessibility” settings.
- Press and hold the "Hash Mark" key then press "" up key: moves to
the left.
- Press and hold the "Hash Mark" key then press "" down key: moves to
the right.
- Press and hold the "Hash Mark" key then press "volume up" key:
increases the volume of the ringtone.
- Press and hold the "Hash Mark" key then press "volume down" key:
decreases the volume of the ringtone.
Please note: the left / right movement are notably used to move the volume slider
bars (alarm volume, ringtones volume, volume of notifications etc.).
Please note: items on SmartVision are presented in list form. Each item can be
selected with the navigation "up" and "down" keys However, some applications
downloaded on PlayStore may have a different architecture. Move to the "left" and
"right" are potentially useful when items are not accessible with the "up" and "down"
keys.

Other manuals for Kapsys SmartVision

Related product manuals