SmartVision & SmartVision LITE – User Guide (Rev. 2.7) – Version 1943.4105 32
Screen reading
SmartVision is equipped with a speech synthesizer that reads the content of the
screen to you.
Screen reading occurs in the following instances:
- A new screen appears, the title and the highlighted item are read back to you.
- A new item has been selected.
- A command has been executed, such as enabling an option.
- An unexpected event occurs, such as the phone going into screen off mode or
receiving an incoming message.
- Whilst navigating the screen with your finger, the touched item is identified to
you through text-to-speech.
You will find out more about text-to-speech functionality as you use it on your
SmartVision.
Please note: slide your finger from left to right, then from right to left to get a voice
over full description of the screen, your finger must remain on the screen for the
command to work.
You can also use the keypad control mode: long press on "Hash Mark" key
then press "2":
To Next Page
Loading...
