KAR-TECH MICRO - DESCRIPTION; OPERATION

MICRO REMOTE
2
DESCRIPTION
The MICRO REMOTE is a state of
the art microprocessor based
Radio Frequency (RF) control
system. It will provide the
operator the ability to wirelessly
operate equipment. The
operator is required to follow all
OSHA www.osha.gov and other
applicable safety standards
when operating the equipment.
Do not use high power radio
devices in close proximity of this
product.
The remote control system
consists of: the radio
transmitter, receiver module,
and associated optional
equipment such as wiring
harnesses and Gate interface
tools.
The transmitter is equipped with
pushbuttons for the various
functions. This transmitter runs
on a 3.7V rechargeable battery.
The system’s radio receiver has
both PWM and ON/OFF outputs
to accommodate the functions
available on the transmitter. All
outputs are current-sourcing. It
also includes RS-232
communication for system
diagnostics.
OPERATION
Power must be applied to the
receiver module for the system
to work.
Pressing the POWER button until
the red and green LEDs appear
will turn on the transmitter.
Pressing and holding the POWER
button until the LEDs turn off
will turn off the transmitter.
Pressing the POWER will turn off
all outputs as a safety feature. If