Kärcher KMR 1000 T - Commissioning; Start-Up the Machine; Drive Machine (Pre-Setting); Run the Machine

English KMR 1000 T 18
COMMISSIONING
Start-up the machine
! Sit in the driver’s seat
Adjust "parking brake" operating
mode
! Press brake pedal and pull button
Raise the sweep roller
Raise the side broom
! Press pedal and set locking device
with step
Set the gas presetting to "Hare"
Pull choke (only for cold engine)
Note
Push choke in again when engine
warms up
Start engine
Note:
Start the machine from the driver's
seat.
The engine can only be started when
the main brush is raised, and the
brake pedal is pressed.
Drive machine (pre-setting)
Drive forwards (F)
Drive in reverse (R)
Shift operation (N)
Move driving direction lever to
position "N"
Run the machine
! Raise the side broom
! Raise the sweep roller
Adjust "foot brake" operating mode
! Press brake pedal
! Press gas pedal
♦ Sweeper travelling speed can be
infinitely regulated.
Braking
! Press brake pedal