Kärcher KMR 1000 T User Manual

English KMR 1000 T 22
! Twist the retaining bracket to the
right
! Tighten the fastening screws
! Put the cover on the dust filter
housing and lock it
Note:
Make sure that the vanes remain
undamaged when mounting the new
filter.
Fill with fuel
♦ Let the engine cool-down
! Adjust "parking brake" operating
mode
! Open unit cover
! Open the tank cover
♦ Use "regular unleaded petrol".
Close tank cap.
Check the tyre air pressure
The air pressure in the front tyres
must be set to 0,9 bar.
The air pressure in the rear tyres
must be set to 0,9 bar.
Mount the side brush
! Insert the side brush in the driver
plate
! Tighten with Allen screws
Change the main brush
! Turn off machine on a level surface
and remove the spark plug
connector
! Secure the machine against rolling
away using a wedge
! Adjust "parking brake" operating
mode
! Remove the swept material
container
Lift the secured machine using two
people.
The lifting force for the side broom
arm is 55 kg.
Remove covers.
Remove covers.
Put sweeper onto a suitable support
(30-50 cm ground clearance for front
wheels).
Ensure that the sweeper is safe for
operation!
Unscrew main brush fastener on both
sides.
On the main brush driver, remove the
main brush on both sides, each with a
screw and flat washer.

Kärcher KMR 1000 T Specifications

General

Brand	Kärcher
Model	KMR 1000 T
Category	Floor Machine
Language	English