2 – 11
OPERA
TION
S
EAT BELT
* ALWAYS fasten the seat belt while operating
the machine.
* ALWAYS check the condition of the seat belt
and mounting hardware before operating the
machine. Replace if damaged.
To Check the Belt
Check for worn or damaged buckle, extrusion and
mounting hardware. Replace them if they worn or
damaged.
To Fasten the Belt
With gripper
c
held and insert extrusion
d
into
buckle
e
until correctly latched.
Adjust the seat belt length according to your body
size. Slightly pull the belt
f
and confirm the belt is
fastened.
T
o Unfasten the Belt
Push in button
g
of buckle
e
and extrusion
d
will
be released from buckle
e
.
CAUTION
T
ypical Example
21
To Next Page
Loading...