4 Default settings
FOCUS 23
4 Default settings
4.1 Program mode
Enter or exit the program by pressing and holding the kV
button for two seconds or more. The beeper will sound
three times. No exposures may be taken while in the
program mode. The READY light will be off.
The menu selections are scrolled with the UP and DOWN
buttons. Enter or exit the selection by pressing the kV
button. Data is edited with the UP button.
The program mode will exit automatically after it remains
idle for 30 seconds. When control returns to the operating
mode, the display will show the updated exposure time.
Menu Selections Display Contents
Film Speed Pr1
fast film (Speed F)
SF
fast film (Ekta speed, E)
SE
slow film (Ultra speed, D)
Sd
Cone selection Pr2
short round
1
short rectangular
2
long round
3
long rectangular
4
short rectangular for sensor size 1
5
short rectangular for sensor size 2
6
Exposure Counter Pr3
First (0 - 999)
2 digits displayed
Second (1000 - 99000)
3 digits displayed
AEC selection (NOT IN USE) Pr4
AEC selection ON
AEC
AEC selection OFF
---
Set Factory Defaults, two beeps Pr5
Speaker adjustment Pr6
speaker volume (1 = min. 8 = max.)
1-8
DAP Cumulative Dose Area Product Pr7
to reset cumulative counter, press D
Sensor type selection* Pr8
intraoral x-ray sensor (default)
GEN
(alternative intraoral sensor)
SIG
To Next Page
Loading...
