KaVo FOCUS - Changing the Fuses

6 Maintenance
30 FOCUS
6.5 Changing the fuses
The fuses are located next to the mains switch on the
bottom of the access block.
Push inward on the fuse base and twist it counterclockwise
with a screwdriver. The fuse with the base will come out.
Remove the fuse from the base and replace it with the new
one. Repeat this with each blown fuse. Fasten both fuses
by pushing the base in and twisting it clockwise with a
screwdriver.
WARNING! Replace the fuses only with fuses of the same
type and rating.