KBL Tower space 2000 - Page 34

Operating Instructions | KBL Tower space 2000
34
Starts the Aroma test (1 cycle).
㊿
AROMA 07/07
Aroma start testcycle
> Start: press `+` for 2s
Not available in this system.
󱞸
AIR CONDITIONING 01/02
Aircon (air conditioning)
Specifies the “start speed” setting of the body fan
at the beginning of the tanning.
Factory setting: 2
󱞹
>
> 1 .. . 9
AIR CONDITIONING 02/02
Start level body fan
Not available in this system.
Note:
For tanning devices with LED technology, the
desired RGB color mode is adjusted by the color-
Motion controller.
󱞺
>
RGB 01/01
RGB mode
EASYCARE 01/03
SETTINGS
> press ENTER
Not available in this system.
󱞻
UV-LEVEL 01/01
SET UV-LEVEL
󱞼
>
These settings must only be made by trained
service personnel!
Loads the factory (default) settings.
󱞽
SERVICE 01/11
Load factory defaults
> Reset: press `-` for 2s
SERVICE 02/11
PERSONAL PIN
> press ENTER
Submenu call
with START/ENTER.
󱞾
PERSONAL PIN activate / deactivate
Enter your personal PIN.
SERVICE\PERSONAL PIN 01/01
ENTER SOLARIUM PERSONAL PIN
> PIN:
SUBMENU