KBL Tower space 2000 - Page 35

Operating Instructions | KBL Tower space 2000
35
SERVICE 03/11
BLUETOOTH
> press ENTER
Submenu BLUETOOTH.
Invoked by pressing
START (ENTER).
SUBMENU
BLUETOOTH
Name 󱞿
Powerlevel 󱟀
󱞿
To fit your Studio environment (multiple units) differ-
ent numbers can be added to the bluetooth device
name (megaSun xx) of each solarium.
Factory setting: 01
SERVICE/BLUETOOTH 01/02
Name: KBL Sound
>
> 01 - 99
Sets the transmission power for bluetooth.
Factory setting: 4
󱟀
>
> 1 .. . 7
SERVICE\BLUETOOTH 02/02
Powerlevel
Submenu call with START/ENTER. Displays the
current firmware typ / variant.
󱟁
SERVICE 04/11
FIRMWARE-TYP
> press enter
Submenu call with START/ENTER. Displays the cur-
rent firmware version of the system components.
󱟂
Do not operate the system with different
firmware versions!
• All system components must be equipped
with an identical firmware version.
SERVICE 05/11
FIRMWARE-VERSIONS
> press enter
Submenu call with START/ENTER. Displays the first
and the last Software-Upload.
󱟃
SERVICE 06/11
SOFTWARE UPLOAD
> press enter
Not available in this system.
󱟄
>
SERVICE 07/11
RGB-Setup
SERVICE 08/11
SERVICE MODE
> press ENTER
Submenu SERVICE MODE.
Invoked by pressing
START (ENTER).
SUBMENU
SERVICE MODE
Service mode without tanning 󱟅
Service mode with tanning 󱟆