KBL Tower space 2000 - Page 36

Operating Instructions | KBL Tower space 2000
36
Troubleshooting mode.
The service mode is switched on for 30 minutes.
The mains voltage is connected. Error notifications
are ignored, but tanning cannot be started.
󱟅
SERVICE 01/02
Service mode without tanning
> Start: press `ENTER` for 2s
Troubleshooting mode.
The service mode is switched on for 10 minutes.
The mains voltage is connected. Error notifica-
tions are ignored, tanning can be started. After this
period, there is a 3 minute restart lockout.
󱟆
SERVICE 02/02
Service mode with tanning
> Start: press `ENTER` for 2s
Show the characteristics of the tanning device:
- Configuration code
- Variant code
- Serial number
󱟇
SERVICE 09/11
SOLARIUM IDENTIFICATION
> press enter
Branches to further configuration options.
󱟈
These settings must only be made by
trained service personnel!
SERVICE 10/11
SOLARIUM X-CODE
>
> PIN:
Performs a restart of the electronics.
󱟉
SERVICE 11/11
Reboot
> Reboot: press `-` for 2s
Attention
• All unsaved changes will be discarded!
Lists the latest 99 events (error codes & info-
messages). Detailed information is available by
pressing the Start button.
Example:
no. time date code tanning time
001 16:44 05.01.09 0011 03:23
002 15:22 05.01.09 0002 07:22
003 10:07 22.12.08 .... ....
004 17:16 ....
005 ....
....
099
󱟊
EVENTLOG 01/01
>