KC-P30 Mounting and installation instructions
Installation manual V3.28
27
© KEBA
4) Turn the hanger bolts into the hole / anchors until the thread still pro-
trudes approx.20 mm
x .
5) Pull the cable through the prepared openings on the charging station.
Pay attention to leak tightness!
6) 4 of the supplied washers can be used to compensate for any uneven-
ness and to ensure proper water flow behind the device: If necessary,
place the washers
1 on the hanger bolts.
7) Position the charging station on the wall and secure it with the 4 wash-
ers
3 and nuts 4 to the hanger bolts 5 .
The charging station is now mounted on the wall and ready for cabling.
To Next Page
Loading...
