P30 x-seriesSafety instructions
Configuration manual V4.01
10
© KEBA
2 Safety instructions
WARNING!
Danger due to electric shock and fire hazard!
● Installation, commissioning, maintenance or retrofitting of the charging
station must be performed by correctly trained, qualified and authorized
electricians
1)
who are fully responsible for the compliance with existing
standards and installation regulations. For details, see the "installation
manual".
● The connection panel is never permitted to be left open unattended. Be-
fore leaving the charging station, the connection panel cover must be
mounted.
● A damaged charging station must be switched off immediately and re-
paired or replaced by a qualified and authorized electrician.
● A repair of the charging station is not permitted and may only be carried
out by the manufacturer.
● No unauthorized modifications may be made to the charging station.
● No markings (such as safety symbols, warnings, wire markings ...) may
be removed from the charging station.
● Never use defective, worn or dirty charging plugs.
● No cable extension may be connected to the charging cable of the
charging station.
1)
Persons who, due to their special training, expertise and experience as
well as knowledge of current standards, are able to assess the work per-
formed and the possible hazards.
Caution
Possible damage to property!
● Pull the charging cable out of the plug holder only by the plug and not by
the cable.
● The charging cable may not be not damaged mechanically (kinked,
pinched or driven over) and the contact area is not allowed to come into
contact with sources of heat, dirt or water.
● Never clean the charging station with aggressive solvents and cleaning
products, scouring materials, water jets (e.g. garden hose, pressure
cleaner etc.) or excessive pressure.
To Next Page
Loading...
