Keba KeContact P30 x-series - Software Update Via Web Interface

P30 x-seriesMaintenance
Configuration manual V4.01
38
© KEBA
7.1.1 Software update via web interface
Illustration7-10: Web interface software update
To perform a software update via the web interface, the following steps are
necessary:
1) Download the current software for the charging station (* .keb file).
2) Log into the web interface of the charging station.
3) In the main menu under "System" select the item "Software Update".
4) Upload the current software using the "Choose a file ..." button.
5) Start the update process with the "Upload & Install" button.
7.1.2 Software update via USB stick (x-series only)
To perform a software update via a USB stick, the following steps are neces-
sary:
1) Download the current software for the charging station (* .keb file).
2) Plug the USB stick into a PC.
3) Format the USB stick with FAT32.
4) Create a new directory on the USB stick with the name "UPD".
5) Copy the downloaded *.keb file into the "UPD" directory.
6) Connect the USB stick to the USB interface of the charging station. The
update starts automatically.
7.1.3 Software update via OCPP backend
The software update for the entire charging network can be performed via
the OCPP backend.
To perform the software update an FTP link is required. The information
downloaded from the KEBA website along with the software update contains
the FTP link.
For details on using the FTP link, see the OCPP backend manual.