Keba KeContact P30 x-series - Displays and Signals

P30 x-series System overview
Configuration manual V4.01
17
© KEBA
3.2.1 Displays and signals
The display on the front of the charging station provides information about
which communication connection is established.
Display Description
blue | blue | blue | blue
Communication is possible throughout the network.
The master charging station and the OCPP backend are reach-
able.
blue | blue | blue | -
Communication between master and slave charging stations is
possible.
The OCPP backend is not reachable or missing.
- | blue | blue | -
Communication between master and slave charging stations is
not possible.
The OCPP backend is not reachable.
3.2.2 Direct connection of master and slave
A single slave charging station can be connected directly to the master
charging station via LAN.
Illustration3-4: Direct connection of master and slave
1 ... P30 x-series (master) 2 ... P20/P30 c-series (slave)
In this case, the master charging station must be configured as a DHCP
server. The IP address is then assigned to the slave charging station by the
master charging station.