P30 x-series System overview
Configuration manual V4.01
15
© KEBA
For the connection to an external OCPP backend via GSM, a SIM card must
be installed during commissioning. In addition, GSM must be activated as
connection to the OCPP backend and the access data of the mobile service
provider must be set in the configuration.
The technical data of the GSM interface and the SIM card can be found in
the "Installation Manual".
Preparing the GSM connection
The SIM card is inserted in the GSM module. The slot for the SIM card is lo-
cated in the connection panel of the charging station. To access this button,
the housing cover and the connection panel cover must be removed.
Illustration3-3: Insertion slot
Inserting the SIM card
Caution
Property damage due to contamination!
Pay attention to cleanliness in the connection panel, so that no contamina-
tion (wire scraps, ...) passes through the SIM insertion slot into the inside of
the charging station.
1) If still present, remove the indicated sticker above the SIM insertion slot.
2) Lightly press the SIM card into the slot until the spring mechanism locks.
To Next Page
Loading...
