1 Contents
2 Before you Start
2.1 Checking the bench for installation
2.2 Check and adjust worktop flatness
The fixing bracket jacking screws
2.2 Setting out the fixing brackets
3 Setting up
3.1 Fitting the Lift Handles (remove strapping)
3.2 Adjust for groove alignment
3.3 Positioning the Base Fixing brackets
3.4 Check and adjust the clamping
3.5 Adjust for flatness and grip - paper test
3.6 Build up bench surface
4 Operation
4.1 About the blades - inserting and setting the blade - blade
depth adjuster
4.2 Inserting the blade and setting the depth
4.3 Inserting and aligning the material
4.4 Cutting heavy and lightweight materials
4.5 Using the textile cutting attachment
5 Maintenance
5.1 Cleaning and lubrication - (warning note)
Adjusting the cutting head sliding bearings.
1
Contents
1
To Next Page
Loading...
Need help?
General