4 . E L E C T R I C S A F E T Y
a) The relaxation of calbe is hidden trouble;
so remember to clamp each calbe to
ensure safety.
b) Don’t bend cable nip toward welding
point.
c) Band cable on oppointed position.
d) Never lay cable in the bottom of frame
or in needle angle position.
e) Never lay calbe in the end of bolts or
nuts.
f) Keep calbe away from hot source part
or some position where calbe may be
clipped when moving.
g) Lay cable along handlebar, don’t pull it
too tight or too loose, and never terrer
with other parts when ratoating in any
position.
h) Lay calbe smooth, never distort or tie it.
i) Before connecting joint, inspect if joint
is damaged and joint is stretched.
j) If calbe is layed in needle angle or
turning position, protect calbe with
adhesive tape or tube.
k) After repairing, band up it with adhesive
tape.
l) Never keep contolling calbe bended or
distorted. If controlling calbe is
damaged, you may lose stable.
To Next Page
Loading...
